# PVS DDC安装完毕好后就可以安装PSV，这里新建两个服务器用来安装。分别为server-108， server-109 **分别使用Citrix专用管理员帐号**（以后默认也都是使用这个帐号做为维护管理员）登陆两台PSV服务器，做基础处理，以后不在赘述 * 加入AD域 * 使用AD域账号CTX登录 * 关闭防火墙 * 如果是克隆机器请重新生成SIN * 配置静态IP # PVS1的安装 1. 挂载上PVS安装镜像『Citrix_Provisioning_7_15.iso』后双击开始配置，先点控制台安装 ![image-20230414111119227](assets/image-20230414111119227.png) 2. 一直下一步 ![image-20230414134840990](assets/image-20230414134840990.png) 3. 上面的控制台安装完后点击服务器安装，安装 ![image-20230414134945338](assets/image-20230414134945338.png) 4. 一直下一步安装完成 ![image-20230414135055518](assets/image-20230414135055518.png) # PVS1的初始化配置 1. 完成以上的PVS组件安装后，系统会自动弹出『Provisioning Services配置向导』，点下一步 ![image-20230414135151963](assets/image-20230414135151963.png) 2. DHCP不在这台上，选择『在其它……』,下一步 ![image-20230414135224399](assets/image-20230414135224399.png) 3. 选择『在其它……』，下一步 ![image-20230414135253393](assets/image-20230414135253393.png) 4. 创建一个场 ![image-20230414135400712](assets/image-20230414135400712.png) 5. 输入数据库的侦听地址，其它 可以不用填写，下一步 ![image-20230414135433704](assets/image-20230414135433704.png) 6. 默认数据库名称即可，下一步 ![image-20230414135532531](assets/image-20230414135532531.png) 7. 在C盘新建一个『vDisk』（名字可以自己随意写也行），下一步 ![image-20230414135628948](assets/image-20230414135628948.png) 8. 填写许可服务器地址 ![image-20230414135656922](assets/image-20230414135656922.png) 9. 默认网络服务帐户，下一步 ![image-20230414135723308](assets/image-20230414135723308.png) 10. 默认，下一步 ![image-20230414135739537](assets/image-20230414135739537.png) ![image-20230414135803672](assets/image-20230414135803672.png) 11. 勾一下，下一步 ![image-20230414135828009](assets/image-20230414135828009.png) 12. 下一步 ![image-20230414135852489](assets/image-20230414135852489.png) ![image-20230414135900338](assets/image-20230414135900338.png) 13. 完成 ![image-20230414135936465](assets/image-20230414135936465.png) ![image-20230414140153523](assets/image-20230414140153523.png) # PVS2的安装及冗余配置 PVS2的安装与PVS1一般无二，请参考前面『PVS1安装』的章节，我们开始PVS2的冗余配置，也就是将PVS2加入到PVS1创建的场里 1. 安装好也是会自动打开配置向导，如果没打开，可以在开始菜单里找到 ![image-20230414142700058](assets/image-20230414142700058.png) 2. 选择『在其它……』，下一步 ![image-20230414142718424](assets/image-20230414142718424.png) 3. 『在其它……』,下一步 ![image-20230414142741108](assets/image-20230414142741108.png) 4. 加入现有场 ![image-20230414142802478](assets/image-20230414142802478.png) 5. 同样填写一样的侦听地址 ![image-20230414142925970](assets/image-20230414142925970.png) 6. 没得选下一步 ![image-20230414142945626](assets/image-20230414142945626.png) 7. 只有一个默认站点，下一步 ![image-20230414143013737](assets/image-20230414143013737.png) ![image-20230414143020034](assets/image-20230414143020034.png) ![image-20230414143034619](assets/image-20230414143034619.png) ![image-20230414143054092](assets/image-20230414143054092.png) 8. 勾上，下一步 ![image-20230414143127556](assets/image-20230414143127556.png) 9. 填上PVS2的地址，确定，下一步 ![image-20230414143219552](assets/image-20230414143219552.png) 10. 下一步直到完成 ![image-20230414143444536](assets/image-20230414143444536.png) 11. 在开始菜单打开控制台 ![image-20230414143521225](assets/image-20230414143521225.png) 12. 右键-连接场 ![image-20230414143541572](assets/image-20230414143541572.png) 13. 输入本地地址或名称，使用现在登陆的Citrix专用管理员帐号 ![image-20230414143626755](assets/image-20230414143626755.png) 14. 这时在服务器的文件夹里可以看到PVS2的状态是绿色的，代表服务运行正常 ![image-20230414143705336](assets/image-20230414143705336.png)